AO-FOP Optical Platform Wavelength Division Transmission, 10-80km Ultra-Long Distance, 10 Gigabit Transmission, 1G/10G/25G/40G/100G Active Wavelength Division Equipment, CWDM, DWDM, WDM, Fast port expansion
Free Shipping
Free standard shipping on orders over $99
Estimated to be delivered on 3-4 Days.
Free Returns
Learn More.
ADOP Cutting-Edge Optics: EDGE-WDM (AO-FOP)
Product Introduction
The EGDE-WDM (AO-FOP) series is the most effective solution for fiber expansion at present. It does not require rewiring, plug and play, the maximum transmission distance can be up to 120 km, and it can be expanded to 12 service ports. Each signal is independent of each other and pure It is physically isolated and does not interfere with each other. It can be used as private network access for different unit users at the same time, and all ports are transmitted in one optical fiber, which effectively improves the use of optical fiber and reduces network operating costs.
It has the advantages of low cost, small device size, low power consumption and high reliability. It is favored in metropolitan area networks, access networks, and optical fiber area storage networks. Especially in the metropolitan area network, it can provide a cost-effective network construction solution.
It has the advantages of low insertion loss, absolute isolation, stable performance and simple use. It supports hot-swappable function, plug-and-play, and does not require complicated debugging and activation. The appearance is a 19-inch 1U chassis, which can be easily installed in a conventional cabinet. According to needs, you can also choose 3 different rates, 1G/10G/25G rate signal transmission. Can be used to further expand network bandwidth.
Product Features
- 19 inch 1U chassis
- Dual LC/UPC interface
- Single fiber can be expanded to 8 business ports
- Dual fiber can be expanded to 12 business ports
- 4/8/12 business port, special port can be customized
- Operating temperature range: 0℃ to 70℃
ADOP Fiber Resource Expansion Solution
With the widespread application of optical fiber transmission technology, the access layer optical cable resources are increasingly scarce. At present, the following solutions can choose to solve the problem of optical fiber resources. Large logarithmic optical cables or new DWDM and OTN networks can be re-layed in the metropolitan area. However, these several solutions have the disadvantages of long construction period, high investment cost, insufficient short-term coverage, difficulty in opening and maintenance, and inflexible practical application, and they are not suitable for the application of the access layer. The EDGE-WDM solution can expand capacity on demand, and has the characteristics of low cost, easy deployment, and flexible application. Adopting can well balance application demand and investment, and it is an ideal metropolitan area network transmission
Product Advantages:
- With the use of optical fiber expandability.
- With optical fiber path backup.
- It can provide a backup mechanism that does not change the structure of the application system.
- Flexible network system center changes.
- With the expandability of optical fiber use.
- Give full play to the characteristics of optical fiber use (multi-x applications), and increase the capacity and bandwidth of optical fiber transmission.
- Provide ultra-long distance optical fiber transmission capability.
- Optical fiber transmission adopts fully transparent transmission, without any conversion, any advanced transmission technology evolution (Protocol or Bit Rate) in the future can be easily integrated into the current EDGE-WDM transmission platform, that is, there is no need to change the optical fiber New technologies/new services can be added to the loop architecture.
Application Solution
- Optical fiber resource expansion solution
ADOP fiber optic cable resource expansion solution reuses equipment through passive expansion containers. Through the transformation of the network, 4/8/12 channels of data can be transmitted in one optical fiber. The passive optical fiber expansion and transformation diagram is as follows:
Application 1: Ordinary passive solution
Professional maintenance and installation are required, and it is difficult to solve on-site problems in real time. Each channel needs to be paired and complicated.
Application 2: EDGE-WDM (AO-FOP) solution
Only a pair of optical fibers is needed between the optical fiber expansion equipment, and there is no need to change the form of the original BBU/DU equipment and RRU/AAU equipment. It is plug-and-play and can support mixed transmission of other types of services.
|
System Parameters |
Technical Indicators |
|
|
Optical Fiber Expansion |
The fiber capacity of a single device can be expanded up to 12 times |
|
|
Introduce Loss |
The introduction of equipment at both ends does not increase the attenuation of the original optical fiber, and its connection and transmission loss are less than 1dB |
|
|
Access Service Type |
Support BBU and RRU interconnection, PTN interconnection, SDH interconnection, PON system OLT and splitter interconnection and mixed transmission of multiple services, without any changes to the original BBU, RRU, PTN and other equipment; The interface does not need to replace the hardware, and can directly support CPRI interface (1~7), optical Ethernet interface (100M~10G), SDH interface (155M~10G) through the network management background and foreground software configuration |
|
|
Transmission Distance |
Support transmission distance 10KM, 20KM, 40KM, 80KM, 100KM, 120KM, 160KM optional |
|
|
Transmission Delay |
Less than 1us |
|
|
Way Out |
The equipment's external connection line (such as optical fiber, software debugging, etc.) adopts the front-out line mode, and the power supply uses the after-line mode. |
|
|
Cascade Characteristics |
Supports cascading of more than 8 pairs of devices, without affecting the performance of the device after cascading, and supporting any rate during cascading |
|
|
Clock Characteristics |
Support IEEE 1588 v2 clock protocol |
|
|
Protection Characteristics |
Support OLP line protection, switching time is not more than 50ms |
|
|
Network Management |
Supports local loopback and remote loopback functions, can read the optical power of all ports input and output fibers online, which is convenient for network maintenance and fault location |
|
|
Working Environment |
Working temperature |
-10℃~+70℃ |
|
Working humidity |
5%~95% |
|
|
Input Power |
DC -5V 3A, or AC 220V (optional) |
|
|
Full Load Function |
≤55W |
|
|
Equipment Size |
1U chassis |
440mm(W)×45mm(H)×310mm(D) |
|
Small box |
180mm(W)×35mm(H)×105mm(D) |
|
|
MTBF |
117501 Hours |
|
|
Electromagnetic Regulations |
Comply with GB/T 17626.2 or IEC 61000-4-2, GB/T 17626.3 or IEC61000-4-3, GB/T 17626.4 or IEC61000-4-4, GB/T 17626.5 or IEC 61000-4-5, GB/T 17606.6 or IEC 61000-4-6, GB 9254 or CISPR22, GB 9254 or CISPR22, GR-1089-CORE requirements |
|
|
Safety Regulations |
Meet the requirements of GB 4943-2001, GB 7247.1-2001, GB/Z 1846-2001, GR-63-CORE |
|
Ordering Information
|
Model |
Description |
|
EDGE-WDM-GE-10 |
Standard 4 Gigabit service ports, 10 km transmission distance |
|
EDGE-WDM-GE-40 |
Standard 4 Gigabit service ports, 40 km transmission distance |
|
EDGE-WDM-GE-80 |
Standard 4 Gigabit service ports, 80 km transmission distance |
|
EDGE-WDM-GE-Max |
Standard 4 Gigabit service ports, 120 km transmission distance |
|
EDGE-WDM-GE-Future |
Standard 4 Gigabit service ports, 160 km transmission distance |
|
10G |
|
|
EDGE-WDM-10GE-10 |
Standard 4 10 Gigabit service ports, 10 km transmission distance |
|
EDGE-WDM-10GE-40 |
Standard 4 10 Gigabit service ports, 40 kilometers transmission distance |
|
EDGE-WDM-10GE-80 |
Standard 4 10 Gigabit service ports, 80 km transmission distance |
|
25G |
|
|
EDGE-WDM-25GE-10 |
Standard 4 25G service ports, 10km transmission distance |
|
EDGE-WDM-25GE-40 |
Standard 4 25G service ports, 40km transmission distance |
|
Note: 1. The products in the above table are the default solutions for this model (excluding 1U chassis), we can also customize other solutions for customers with special requirements 2. When the main optical fiber network is single fiber, the maximum capacity can be expanded to 8; when dual fiber is used, it can reach 12 ports 3. When you customize less than 4 service ports, the stack expansion will not be possible later |
|
Returns Policy
All products have been thoroughly tested to be free of defects in material and workmanship.
If any product should malfunction while used in its recommended environment during the applicable warranty period under adop.cn warranty policy, adop.cn, at its option, will repair or replace the product at no charge.
For non-defective product purchased directly from adop.cn, you may return it within 15 days from the original date of purchase for a refund.
In the unlikely event of a wrong or defective or failed item that you want to ask for return and refund within 15 days of delivery, immediately make note of the part number, serial number and description and proof of issue. Email or call your sales representative to submit part(s) and receive an RMA # and return instruction via email. Return tracking No. must be provided within 7 working days after you receive the RMA in order to get a full refund (refunds don't include freight charge and transaction cost). You should expect to receive your refund within 2 months of giving your package to the return shipper; however, in many cases you will receive a refund sooner. This time period includes the transit time for us to receive your return from the shipper (7 to 30 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
RMA is not acceptable if: Products exceeds the warranty period. Products don't accord with adop.cn warranty policy. No RMA agreement was reached with a adop.cn sales representative before RMA. RMA is not done based on adop.cn RMA instructions. RMA Request In the unlikely event of a wrong or defective or failed item, immediately make note of the part number, serial number and description and proof of issue. Email or call your sales representative to submit part(s) and receive an RMA # via email. We will promptly send the RMA number and return instruction. Please provide return tracking No. within 7 working days after you receive the RMA. Please let us know if there is a production link at stake, for we will often cross-ship to ensure minimal downtime. For customers who do not practice sparing, replacement product is usually in stock and ready to ship.
Return Part Package You must adequately package any product you are returning to ensure that it is not damaged during return delivery to our warehouse. All original items including packaging must also be returned. You may choose to return the product by your own means or we will arrange for any products you want returned to be collected, at your cost.
If you are entitled to a refund, we will only give you the refund once we have received the product at our warehouse and inspected it and assessed whether it is eligible for a refund under these Conditions of Sale. Any refund we make will be by the same payment method used to purchase the product.